Montage
• Loosen the central hex nut of the hand shaft, and remove it along with the washer. The rubber disc remains
on the clock movement.
• Attach the clock movement from the back through the borehole of the clock-face and align it horizontally.
• Place the washer above the hand shaft, and tighten the clock movement with the middle hexagon nut. In
this process, make sure you don‘t tighten the nut too firmly to avoid twisting and damages.
• First, carefully attach the hour hand to the hand shaft, then the minute hand and lastly the second hand.
• Align all the hands of the clock to the 12 o‘clock position.
• Make sure the hands are aligned parallel to the clock-face so that they don‘t touch each other during
operation or rub against the clock-face.
Inserting the battery
• Insert a battery of type 1.5 V Mignon/AA into the battery compartment on the back of the casing, while
observing the correct polarity. The correct polarity is indicated inside the battery compartment.
• Replace the battery once the clock stops or the accuracy of the clock movement decreases.
Setting the time
Set the time by turning the white dial on the rear of the housing. The adjustment knob can be rotated in both
directions here.
Maintenance and cleaning
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions since these
could damage the housing or even impair operation.
You can use a clean, dry, soft cloth for cleaning. Dust can be easily removed with a soft, clean brush.
Disposal
a) Product
Electronic devices are recyclable and do not belong in the household waste. Dispose of an
unserviceable device in accordance with the relevant statutory regulations.
Remove the battery if there is one inserted and dispose of it separately from the product.
b) Primary batteries and secondary batteries
As the end user, you are required by law (battery regulation) to return used batteries. Do not dispose of used
batteries in the household waste!
Batteries/rechargeable batteries contain harmful materials and are labelled with the symbol
shown to indicate that disposal in the household waste is forbidden. The symbols of the critical
heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead (marking can be seen on the battery /
rechargeable battery, e.g., underneath the refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at the official collection
points of your community, in our stores, or at places where batteries or rechargeable batteries
are sold!
That way you fulfil your statutory obligations and contribute to the protection of the environment!
Technical data
Battery .................................................. 1 x 1.5 V Mignon battery (AA)
Battery life ............................................. approx. 10 months
Accuracy ............................................... max. 30s/month (@ 1.5 V and 25 °C)
Clock face thickness ............................. max. 2.5 mm
Mounting hole ....................................... 8 mm
Length of hand shaft ............................. 6 mm
Hand hole ............................................. 5.5/3.7 mm (hour/minute hands)
Dimensions ........................................... 56 x 56 x 17 mm
Weight .................................................. 99 g
Operating temperature range ............... -10 to +50 °C
Operating instructions
Quartz clock movement with 2 hands
Item no. 1680333
Intended use
The clock movement is used to display the time.
To this end, a dial is installed and provided with suitable hands.
The watch may only be operated by a battery (for the type, refer to “Technical data”).
The product may only be used in enclosed indoor locations; outdoor use is not permitted. Do not expose to
moisture, under any circumstances.
For safety and approval reasons, you may not convert and/or alter the product in any way. If you use the
product for other purposes than those described above, the product may be damaged. Furthermore, im-
proper use may cause risks such as short-circuits, fire, injuries, etc. Please read the operating instructions
carefully and do not discard them. Please include these operating instructions when you pass the product
on to a third party.
This product complies with the applicable national and European Regulations. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
• Quartz clock movement
• 2 sets of hands
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in these operating instructions
that must be adhered to.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention to the safety
instructions. We do not assume liability for any injuries/material damages resulting from
failure to observe the safety instructions and the information in these operating instruc-
tions regarding the proper use of the product. Furthermore, in such cases, the warranty/
guarantee will be null and void.
a) General information
• Please handle the product with care. It can be damaged by impact, blows, or by being
dropped, even from a low height.
• Do not expose the product to high temperatures, dampness, moisture, strong vibrations or
heavy mechanical loads.
• This product is not a toy and should be kept out of reach of children. Only use the product
out of the reach of children. The product contains small parts and a battery that could be
swallowed.
• Do not leave the packaging material lying around carelessly, since it could become a danger-
ous toy for children.
• If safe operation is no longer possible, take the device out of service and secure it against
unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of time or
- has been exposed to considerable strain during transport.
• Maintenance, adjustment and repair work should only be carried out by an expert or a spe-
cialised workshop.
• If you have any questions that are not answered in these operating instructions, please con-
tact our technical customer service or another specialist.
b) Battery Instructions
• Batteries should be kept out of the reach of children.
• Do not leave batteries lying around in the open; there is a risk of them being swallowed by
children or domestic animals. If swallowed, consult a doctor immediately.
• Leaking or damaged batteries can cause burns if they come into contact with the skin. You
should therefore wear suitable protective gloves.
• Batteries must not be short-circuited, opened or thrown into a fire. There is a danger of explo-
sion!
• Do not recharge normal, non-rechargeable batteries; they may explode! Only recharge re-
chargeable batteries that are intended for this purpose; use a suitable battery charger.
• Please pay attention to the correct polarity (plus/+ and minus/-) when inserting the battery.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE.
1680333_V1_0818_02_m_VTP_en