24
Move the trigger forwards to maintain a continuous flow of water (as shown in the
diagram). Moving the trigger to the 8 o'clock position (not shown) also maintains a
continuous flow of water. Use either position if you want to maintain the flow of water
without keeping your hand on the trigger.
Rotate the top of the spray nozzle (11) to adjust the spray setting.
b) Automatic shut-off
• The motor turns off automatically when the trigger (9) is released.
•
The motor will switch back on and water will flow from the spray nozzle (11) when you pull the trigger. Wait for 5 to
10 seconds after releasing the trigger before pulling it again.
• If the appliance switches off automatically, do not leave it switched off for longer than 10 minutes. Switch it back on
using the trigger or move the on/off switch (1) to the
OFF
position.
c) After use
• Switch off the appliance by moving the on/off switch (1) to the
OFF
position.
• Pull the trigger (9) to drain any excess water.
• Remove the hose from the spray gun (10).
• Pull the trigger again and point the spray gun at the ground to release any remaining water.
11. Maintenance and cleaning
a) Cleaning the appliance
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the product.
• Always disconnect the appliance from the power supply (cigarette lighter) before cleaning it.
• Use a damp, lint-free cloth to clean the exterior of the appliance and the accessories.
