Installation Manual
ASANO N3
© 2019 basalt
e v2.0
1
IR OUT
2
S/PDIF optical input
3
2x 3.5 mini jack analogue input
4
Asano audio network
Before operating the unit, please read this
manual thoroughly and keep it for future
reference.
Model No. 0701-03
Caution: any changes or modifications
not expressly approved in this manual
could void your authority to operate this
equipment.
Description
Asano N3 is an input module to connect 3 sources to the Asano system. Each source supports input detection. The
module has one output to control IR devices using IR transmitter (not included).
N3 can only be used in combination with S4 and is fully controlled over the audio network. The S4’s integrated KNX
control allows you to integrate the Asano N3 in a KNX system.
LED feedback
The N3 has a feedback LED which indicates following statuses:
• Blue: standby mode
• White: at least one input is active
1
2
4
3
3
How to mount the unit
Asano N3 can be installed horizontally but can also be
mounted vertically.
Position the screws correctly, to ensure N3 is mounted
firmly to the wall with its soft feet.
24
40
88
52,5
157
3,5
8
audio network
input 3
input 2
input 1
IR out
