Installation Manual
© 2018 basalt
e v1.0
VIA walkway light 230V
A
Opening to fix the outlet to the wall box
B
Clips to mount the cover plate
C
LED-strip
Safety instructions
Before installing the unit, read this manual thoroughly and retain it for future reference.
The device should be installed in compliance with official regulations valid in country of use.
The device may only be installed and connected by qualified electricians.
Make sure that the wire to the earth is connected to the Via.
The front cover should always be mounted before powering the device.
Ensure that electricity is switched off when installing or unmounting the device.
Do not open, dismantle, alter or modify the device.
Components
model nr: 0480-11
Via walkway light front
A
A
B
B
B
B
D
Via cover
(0481-xx not included)
Wall boxes
The Via should be installed in European wall boxes with screws. The distance
between the screws needs to be 60 mm, and a minimal depth of 45 mm is
required.
Square wall boxes size 60 x 60 mm are compatible with the Via.
The following round wall boxes are compatible with the Basalte walkway light:
•
Helia round with cut hole 68 mm (type 247, 261).
•
Kaiser round with cut hole 68 mm (type 9063-xx, 9064-xx, 9062-xx).
•
Legrand batibox round (ref 080051, 080061, 080052, 080053).
•
ABB round Hafobox MD4050 and hollow wall boxes HW-50, HW50-G,
HW52-F (except HW52-F IGD and HW52-F BW).
When using other round boxes, please verify the compatibility upfront.
Do not use following wall boxes:
• Helia O-range
• Kaiser (1055-xx – 1056-xx)
• ABB 3040
• ABB HW52-F IGD and HW52-F BW
C
D
230V connections
E
Use a flathead screwdriver to open the wire
terminals
Via walkway light back
N L
E
