BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8710
Engine Timing Tool Set for BMW, Mini, PSA
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third-parties.
INTENDED USE
This tool set is used for aligning the newer and older type of balance shaft. The included tools prevent
the engine from running unevenly due to incorrectly aligned balance shafts and they are used as
OEM 115140, 119280, 119330.
SAFETY INFORMATIONS
•
Keep children and other unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the contained tools on the vehicle battery. Danger of short circuit.
•
Caution when working on the running engines. Loose clothing, tools and other objects may be
caught by rotating parts and cause severe injuries.
•
Be careful when working on hot engines because of the risk of burn injuries!
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and injuries.
•
These instructions serve as brief information and never replace the workshop manual. Please
always obtain technical specifications such as torque values and instructions on disassembly
and assembly from the vehicle-specific service literature.
•
Turn the engine only in the normal direction of rotation (clockwise) unless specified otherwise.
TOOLS
1
Balance shaft alignment tool
2
Balance shaft alignment tool
3
Stop bolt
4
Crankshaft counterholder
5
Chain tensioner locking pin
