Possible Malfunctions
110500
23 / 28
EN
Optimum Results
To obtain optimum results during washing dishes, we recommend to proceed the
following way:
– Wash dishes only when the appliance is ready for work.
– Dosing devices must always be properly set.
– Always keep the dishwasher properly clean.
Periods of Non-Operation
If the appliance is not used for a longer period (holidays, interruptions at work etc.),
follow the instructions below:
– Fully drain the appliance, including the boiler.
– Thoroughly clean the appliance.
– Leave the dishwasher door open.
– Close the water supply valve.
– Switch the main power switch off.
– If there is a risk of frost, order the protection of the appliance against frost
to proper technical service.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Malfunction
Possible Cause
Solution
The appliance
cannot be switched
on.
No voltage in the mains.
Check the thermal
magnetic switch for
disconnection.
Melted fuses.
Contact technical service
to determine the cause.
The appliance is not
switched on through the
main switch.
Close the main switch.
Summary of Contents for US E500 LPR
Page 1: ...US E500 LPR 110500...
Page 4: ...Fig 4 Fig 5 EN 4...
