Installation and operation
A120788
15 / 28
EN
5.2
Operation
•
Przed pier wsz ym uż yciem wycz yś cić urządz eni e i wypos ażenie zgodni e z e ws kazówkami z awartymi w
pu nkcie 6 „Cz yszczen ie”
. M ake s ure no water enters elec tric ins tall ati on and connection box. N as tępni e dokładni e os usz yć urz ądzenie i elementy wyposaż enia.
•
Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er bet ween t he heating element and l eft- over f ood tray.
•
Caref ull y i nser t t he c onnection box wit h the heati ng element at t he bac k edge of t he applianc e. A pin in bott om par t of t he c onnecti on box must ent er a hol e i n t he mai n applianc e. This way t he connec tion box is properly mount ed.
WARNING!
Risk of burns!
During operation, the housing and glass pane door become very hot
and remain hot for a while after switching the appliance off.
Do not touch the appliance during operation nor immediately after
switching it off. Open and close the convection oven using the glass pane
door handle only.
To operate the appliance, use handles and elements designed to this end.
Oven sheets heat up considerably during operation.
For removing hot food use dish-washing cloths or oven mitts.
Preparation of the appliance
1. Prior to operation, clean the appliance and its equipment inside and outside
according to instructions in section
'Cleaning'
.
2. Plug the appliance into a suitable single socket.
3. Prior to first use, and observing instructions in section
'Settings parameters for
the process of cooking/roasting'
, heat up the oven without food to eliminate
any unpleasant odours that come from the thermal insulation. Select the highest
temperature and the longest time.
A small amount of smoke or unpleasant odour may be produced. This is normal
during first use and should not recur.
4. Next, open the glass pane door to allow all the smoke to escape.
Summary of Contents for A120788
Page 1: ...AT120 A120788 ...
