Bartscher 4FL-100, Original Instruction Manual

Page: 14 / 16

Cleaning
12 / 16 700134
EN
Actual temperature of opened wine depends on the ambient temperature. If it is too
high, the wine cooler may not reach the required temperature.
LED Lighting
The wine cooler is equipped with LED lighting, which
— if necessary — may be
switched on and off at any time.
1. Press the LED lighting button, to switch it on.
LED lighting makes it possible to present wine bottles through a transparent plastic
glass in a buffet, at a bar or during wine tasting.
2. Press the LED lighting button again, to switch it off.
Temperature Indicator
Temperature may be displayed according to the selection: in Celsius degrees or in
Fahrenheit degrees.
1. Press and hold the LED lighting button for at least 5 seconds, to change the
displayed temperature.
The acoustic signal sounds.
Switching the Appliance Off
After use, disconnect the appliance from the socket (pull the plug out).
6 Cleaning
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. Wash the appliance regularly.