Possible Malfunctions
191001
23 / 24
EN
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Malfunction
Cause
Solution
Appliance does not
work
The plug is not connected
to the mains socket.
Connect the plug.
The house connection
fuse tripped.
Disconnect the appliance
from mains supply, reset the
fuse and re-connect the
appliance
Temperature regulator set
to position
.
Set the temperature regulator
to the desired position
The appliance is
switched on, but
the operation
indicator light is
not lit
Damaged operation
indicator light
Contact the supplier.
The temperature regulator
knob is not in the correct
position
Set the temperature regulator
to the correct position
The appliance
switches off during
operation
The overheating
protection (dry operation
protection) was triggered:
too little water or no water
in the water tank
Leave the appliance to cool
down, and them fill it with
fresh potable water
Summary of Contents for 191001
Page 1: ...3L 191001...
