- 40 -
WARNING! Injury hazard!
In order to avoid accidents, always use the pusher
handle (4) to push the sliced product to the cut
thickness movable wall (13)!
Adjust
slice thickness
: turn the slice thickness adjustment (
8
) counterclockwise until
it reaches the desired position.
In order to avoid an accident assume correct stance at the slicer (
fig. 8
). Put right
hand on the pusher handle, left next to the slice tray (
12
) so as not to touch the knife;
the body is to be vertical in reference to the workplace.
Correct stance
Incorrect stance
Fig. 8
WARNING! Injury hazard!
Never assume a position when hands, fingers or other parts
of the body might come into contact with the knife!
Turn the device on by pressing the
START
button (9).
Slowly and uniformly move the carriage (
6
) towards the knife (
1
), using the pusher
handle (
4
).
The best slicing results are obtained when the pusher handle (
4
) is slightly pushed
towards the cut thickness movable wall (
13
).
The sliced product comes into contact with the knife (
1
); the slice falls on a tray (
12
)
positioned behind the movable slice thickness wall (
13
).