- 38 -
Put the slicer in such a way that the person operating it could stand straight and
stable in front of the device. The operator has to constantly be able to see the slice
adjustment and the off button.
Always
keep the workplace clean and tidy.
Place the device so that the plug is easily accessible so as to quickly disconnect
the device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
CAUTION!
The device can only be used by a qualified operator who is aware of safety
issues mentioned in this manual.
Before use
Before the first use, clean the device and its accessories thoroughly according to the
instructions in section
6 “Cleaning and maintenance“
.
Fasten the supplied slice cutting guide (
16
).
In order to do so, undo the lower bolt (
f
) of the
knife protecting device (
20
) preliminary mounted
on the rear side of the device with the relevant
screw driver.
Using the undone bold (
f
) fasten the slice cutting
guide (
16
) onto the knife protecting device (
20
).
16
f
20