- 47 -
6. Cleaning and maintenance
WARNING!
Before beginning cleaning, switch off the unit using the on/ off switch (set it
to „O”) and disconnect it from the power supply (pull the plug!).
Leave the device to cool down completely.
The device is not suited for direct washing via water jets!
Protect the device from water penetration.
CAUTION
Do not use any cleaning agents including alcohol, solvents and similar
components.
Do not use any abrasive or scouring cleaning agents, such as steel wool,
steel wool containing soap, metal / plastic sponges or similar agents with
abrasive surface.
Cleaning the inside and outside of the machine
o
Clean the external surface of the device daily using warm water and a sponge or
soft, moist cloth. Then, wipe dry the surface using a soft cloth.
o
Clean the inside of the device (dryer’s drum) each time when the maize granulate is
replaced. Use only warm water and
sponge. Thoroughly wipe dry the dryer’s drum
with a soft cloth.
Replacement of the maize granulate
CAUTION!
Electronic counter counts the hours of work of the machine. After reaching the
number of hours of work set by the manufacturer, alarm indicator lights start flashing
(see. Section
7. “Possible Malfunction”
), which signal a need to replace the maize
granulate.
A warning light remains active in Stand-by mode of the device, until zeroing of the
hour counter. Reaching of the set number of working hours does not block further
operation of the device.
