Bartscher 12-150, Quick Start Manual, Page: 14 / 18

Installation and operation
12 / 18 A114002
EN
Heating Lamp Operation
Following a quick installation, and owing to additional 500 W of power, French fires
may be kept war also from the top.
1. Plug the heating lamp into a suitable single socket.
2. Switch the heating lamp on with the ON/OFF switch.
The heating lamp's operation indicator light (orange) is on and will be lit for the
entire period of operation.
3. When the heating lamp is not to be used any more, switch it off with the
ON/OFF switch, and disconnect the plug from the outlet.
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;