Cleaning
104304
19 / 30
EN
Malfunctions
ATTENTION!
In the case of incorrect operation, disconnect the appliance from power
and water supply. Contact an authorised service, check the appliance and
have it repaired.
• Check if the water supply tap is open.
• Check if the appliance is powered electrically: if the plug is properly connected,
and the disconnecting device is switched on.
• Make sure there are no strange vibrations generated by loose screws.
• If you must perform tasks connected with water loss, screw tightening, etc.,
always switch the appliance off first, and check whether clogged drains are not
the reason for leaks.
• If the appliance produces too little ice, check the condenser for cleanliness and
the coolant for leaks.
6
Cleaning
6.1
Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
