OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER
1.
Remove the exterior and interior packaging. Check that ice scoop is included. If any
parts are missing, please contact our customer service.
2.
Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and
clean it .
3.
Find a location for your ice maker that is protected from direct sunlight and other sources
of heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface. Maker sure
that there is at least 4 inches of space between the back and sides of your ice maker and
the wall.
4.
Allow one hour for the refrigerant fluid to settle before plugging ice maker in. There is at
least 4 inches of space between the back and sides of your ice maker and the wall.
5.
The appliance must be positioned so that the plug is accessible.
6.
Before placing water bottle on the unit, be sure that the drain plug on the back is tightly
fastened.
7.
Hold the water bottle vertically and upside down (over the unit) and place the water
bottle into the SMART CORE for the water bottle. Apply slightly pressure in order to pierce
the bottle cap with the spigot. This unit accepts two, three or five gallon water bottle with
pierceable sealed caps.
4
