Headgrower Hub/Client Setup
Don’t have WiFi in all of your greenhouses? We have a hub / client network option
available with our RadioLink host so you can have select controllers act as communi-
cation hubs between Headgrower and the rest of your controllers.
For any Hub controller(s) - the controller with WiFi access:
1.
Press the Headgrower icon (leaf)
2.
Press Headgrower Network
3.
Press Hub checkbox (if not already checked)
4.
Connect RadioLink to the hub controller. Please note the channel of the RadioLink.
For any Client controller(s) - without WiFi access:
1.
Press the Headgrower icon (leaf)
2.
Press Headgrower Network
3.
Press Client checkbox (if not already checked)
4.
Check the RadioLink is connected to the controller
5.
Ensure the RadioLink’s channel is the same as what was con
fi
gured for the Hub’s Radio-
Link
Start Trial / Subscription Setup
Not seeing your controller information? You probably have not started your 30 day tri-
al or your trial may have expired and now a subscription is needed. The following in-
structions will help you with both, as well as screenshots below.
1.
Log into headgrower.bartinst.com
OR
open the Headgrower app on your device.
2.
Press the Settings icon (top right)
3.
Press Subscription (even if you’re just starting your 30 day trial)
a.
If you haven’t started your 30 day trial, you will see a Start Trial button
b.
If your 30 day trial is active or has expired and you have not
fi
lled out payment
information for a subscription, you will see a New Subscription button. Addition-
ally, the date your trial ends will be shown.
4.
Press the appropriate button.
5.
If you are starting a subscription, complete the required information on the Set Up
Subscription page and press Purchase.
a.
We use Braintree, a PayPal service, as our payment processor.
