Bartec TECH600PRO, User Manual, Page: 10 / 38

TECH600PRO V1.3 Table of Contents
Page 10 NOV 20
TECH600PRO USER GUIDE
S
ELECTING
A V
EHICLE
The phrase “New TPMS Service” is exactly that: Starting a New TPMS Service on a vehicle.
The first recommended step with TPMS service will be selecting the correct vehicle which can be set up in the following
ways:
• Select by VINdicate.
• Select by MMY (Make, Model, Year)
• Note : VINdicate is the process of working through the vehicles OBDII port and decoding the vehicle identification
number (VIN) along with and diagnostic trouble codes providing the user with a more complete understanding of
what the potential issues might be.
S
ELECTING BY
VIN
DICATE
Once the user selects VINdicate the tool will begin with prompts giving the user
directions as well as what the tool is doing.
1. Connect the Wireless VCI to the OBDII port and turn the ignition on.
2. If the ignition is on or VCI is not properly connected you will receive a pop-up
message.
3. Press Enter to lookup vehicle or ESC to cancel.
4. Tool will then begin to read the VIN.
5. Once VIN is read tool will indicate a check mark that it read the VIN.
6. Then it will auto populate the YMM of the vehicle you are working on.
Note:
Some vehicles may not auto populate the MMY.