Bartec TC78ex-NI, Quick Start Manual

Page: 17 / 60

TC78
ex
-NI - Touch Computer
Type B7-A2D*-****/********
Regulatory information
Subject to technical changes.
October 2023
11/52
2.4 Power Supply
WARNING ELECTRICAL SHOCK
Use only a Zebra approved, Certified ITE SELV power supply with appropriate electrical
ratings. Use of alternative power supply will invalidate any approvals given to this unit
and may be dangerous.
2.5 Batteries and Power Packs
2.5.1 Battery information
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
Use only BARTEC approved batteries. Accessories which have battery charging
capability are approved for use with the following battery models:
Standard battery – Type B7-A2Z0-0088/**** (3.85 V / 4680 mAh)
Extended battery – Type B7-A2Z0-0089 (3.85 V / 7000 mAh)
BARTEC approved rechargeable battery packs are designed and constructed to the highest
standards within the industry.
However, there are limitations as to how long a battery can operate or be stored before
needing replacement. Many factors affect the actual life cycle of a battery pack such as
heat, cold, harsh environmental conditions, and severe drops.
When batteries are stored over six months, some irreversible deterioration in overall battery
quality may occur. Store batteries at half charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage.
When storing batteries for one year or longer, the charge level should be verified at least
once a year and charged to half charge.
Replace the battery when a significant loss of run time is detected.