Datei: en_userguide_bartec_tc7x_scanhandle.docx - Datum: 16.03.2020
1
Product Information USER GUIDE
SCAN HANDLE
FOR EX-APPROVED TOUCH COMPUTER
TC 7x SERIES
© BARTEC GmbH 2019 – Subject to changes and amendments, errors expected
1
3
5
1.
INSERTION
1.
Take the TC7x and put it into the left holder
of the handle.
2.
Align the lower left side of the handle
holder to the edge of the black TC7x
rubber.
3.
Now push the right side of the TC7x down
and
4.
move the handle a little bit forward until
the lock catches snap into the holes at the
TC7x battery release buttons.
5.
Then push the right holder of the handle
until it snaps over the right side of the
TC7x. Ready!
If the TC7x Scan Handle is mounted in the
correct position you will hear a gently
“click” when pressing the scan button.
2. Align
4. Move till snap
5.Push
“click”
Note
: The Scan
Handle is
designed to carry
the TC7x with
mounted
handstrap.
For easy
insertion please
put the
handstrap in a
flat position