60
Figure 5.4.2. Subsection dedicated to system acquisition.
5.4.3.
Alarm
The alarm service checks if the vibration exceeds the defined alarm threshold levels. In this case,
the notification service of the MR3000 sends an e-mail to the people listed in contacts where Alarm
1 or Alarm 2 have been checked (see chapter 5.4.4).
Indicator time (seconds)
is the period between the first exceeding of the alarm threshold and the
end of the alarm condition. For event related alarms this setting is not relevant. For the difference
between Alarm based and event based messages see chapter 5.4.4.
Figure 5.4.3. Subsection dedicated to the alarm settings.
