Commissioning
Barcode Hand Scanner
BCS 160
ex
Series, Types 17-21BA-M31S/…….. and 17-21BA-M32S/……..
22/48
Technical data subject to change without notice.
Revision A / Status: 01/2014
5.
Commissioning
Before you assemble the device, make sure that all components and documents are
there.
DANGER
Avoid electrostatic charging in hazardous areas.
There is a risk of a fatal injury in an explosive atmosphere!
Do not use a dry cloth to wipe or clean devices.
Wear suitable clothing and shoes.
Do not use rubber gloves or suchlike.
DANGER
Any use which is not in accordance with the intended purpose will endanger
explosion protection. There is a risk of a fatal injury in an explosive atmosphere!
Do not alter the hand scanner in any way.
If any damage is done to the enclosure or if the device malfunctions, remove the
device from the hazardous area into the safe area.
Take the battery out of the BCS 160
ex
BT in order to put the device out of
operation!
Do not use any rebuild batteries or batteries from other manufacturers.
5.1
Scope of delivery
1 x BCS 160
ex
or BCS 160
ex
BT
1 x Lithium-ion battery (only with the BCS 160
ex
BT)
1 x User manual
5.1.1
Accessories optional
Approved accessories from BARTEC:
−
Power pack
−
Connection cable
−
Extension cable
−
Base station
(only for BCS 160
ex
BT)
−
Charging station
(only for BCS 160
ex
BT)
−
Spare battery
(only for BCS 160
ex
BT)
−
Stand holder
−
Desktop holder
Summary of Contents for 17-21BA-M31S Series
Page 2: ......
Page 6: ...Blank...
