BARTEC BENKE CFPP-4.2, Operating Instructions Manual

Page: 16 / 107

14 Safety
CFPP Process Analyzer CFPP-4.2 03/2016
2.4.3 Ensuring and Maintaining Explosion Protection
• The explosion protection system of the analyzer is designed for the
technical characteristics of the substances which were specified at the time
of ordering the analyzer. Before you switch on the analyzer, and while the
analyzer is operating, make sure (e.g. by de-airing the lines carefully) that
the product feed lines and all lines carrying product contain only the
specified product. Also make sure that the product properties correspond to
the specification.
•
Make sure that no other gases (e.g. hydrogen or oxygen used by other
analyzers) and no other vapors or liquids can reach the analyzer through
the vent-drain-system (vent = waste gas outlet; drain = waste liquid
outlet).
•
It is not permissible to make any technical modifications to the analyzer
without written authorization from BARTEC BENKE. Any unauthorized
modification can impair the safety of the analyzer and lead to accidents.
• Use only spare parts supplied by BARTEC BENKE.
2.5 Protective Devices
The protective devices are required for safe operation of the analyzer.
In addition to the protective devices described above, there are numerous other
components and electrical equipment required for safe operation. Particularly, there are
several individual electrical components which conform to different types of protection. For
further information, please refer to chapter 2.4.