Barry-Wehmiller BW Integrated Systems Streamfeeder V-1400IJ, Manual

Page: 9 / 57

2
V-1400IJ M
anual
Main Assemblies Feature Descriptions
Feature Description
Side guides Single knob adjust (one on each side) allows lateral adjustment from each
side for different size product.
Side guide adjustments Dual-knob design allows you to move side guides together or apart for
different size product. Can be positioned equally or offset.
(Note: Single-
knob design also available.)
Gates and adjustments Single or double gates mounted above the carriage housing the feed belts.
This device provides a curvature to help preshingle stacked product.
When properly adjusted, a clearance is created to help singulate and feed
product.
Adjustable Product Support Rods Rods can be adjusted laterally for support of wider products.
Wedge and adjustments Lifts the product to keep it off the table top, reduces excessive contact with
the feed belts, and helps push the product against the curvature of the
gate assembly. To achieve proper lift, adjustment wing-nuts and locking
levers allow you to slide the wedge to various positions and angles.
Shell One piece shell for mounting of all sub-assemblies and components.
Easy access to controls Located in rear of feeder. Allows for easy assembly and servicing of
control and other electronic components.
Removable carriage Houses the feed belts which provides the friction and motion necessary to
pull individual product from the bottom of the stack and through the gate
assembly. Easy to remove for feed belt replacement.
Lateral feed belt positioning Single knob adjust (one on each side) allows for two outside belts to be
adjusted laterally depending on product size and feeding characteristics.