Barry-Wehmiller BW Integrated Systems Streamfeeder V-1400IJ, Manual

Page: 20 / 57

13 V-1400IJ M
anual
STEP 3A:
Side Guide Adjustment
1. Loosen each side guide lock knob. This will allow you to move
each side guide individually from side to side.
2. Each guide is attached by a pin and slot mechanism allowing the
guide to adjust vertically approximately ½ inch. To move over
a feed belt, lift the side guide and move it laterally. After it has
passed over the belts, push the side guide down in the slot.
Side guide in down position
Side guide in up position
Center
product
on
middle
belt
Loosen
lock knob
Lift side
guides
Move side guides laterally over belts
Lift side
guides
Loosen
lock knob
Position
side
guides
3. Center the product to be run on the middle belt and position
both side guides close to the edge of the product (approximately
1/16th inch) by turning the side guide adjustment knobs.
4. Place a handful of pre-shingled product in the hopper and against
the gate(s).
5. Test run to assure proper feeding and singulation.
6. Tighten the side guide lock knobs to secure the position.