46
APPENDICES - APPENDIX 3
APPENDIX 3 - Setting up Port Forwarding in your
Router
This guide briefly explains port forwarding. Every router is different so please
refer to the manufacturer’s instructions.
In computer networking, port forwarding or port mapping is an application of
network address translation (NAT) that redirects a communication request from
one address and port number combination to another while the packets are
traversing a network gateway, such as a router or firewall.
1. Log in to Router as per manufacturer’s instructions.
2. Under NAT or the port forwarding menu, enter the ports you wish to forward
to the networked 4050 HF SDR Transceiver.
3. From the port forwarding menu under application, enter a description for the
rule, then enter the port number you are forwarding from, the protocol (which
is TCP for this example), the IP address your are forwarding to (the 4050 HF SDR
Transceiver), and the Port you are forwarding to. You have the choice to enable/
disable this port forwarding rule by selecting the checkbox.
Summary of Contents for 4000 Series
Page 2: ......
Page 40: ...40 ETHERNET SETUP SCENARIOS SCENARIO 5 ...