Barracuda Networks CudaCam, Quick Start Manual

Page: 7 / 16

4
5
Connect Ethernet Cable and Ensure Power
Attach the Ethernet Cable. It is a very tight fit which may require some patience.
The camera is powered by its PoE cable. You must use a 48 Volt Ethernet power
injector or a PoE switch to provide power.
If the LED does not light within 30 seconds after inserting the Ethernet jack,
check the power source, cabling and connections.
The cable should run from the
OUT
port of the PoE injector to the camera.
Setup
PoE Injector
PoE Switch