background image

Dear Barracuda Networks Customer, 

Thank you for choosing the CudaCam Dome IP Camera. Barracuda Networks 
offers a complimentary telephone installation appointment with this 
purchase to help you plan your installation, configure your system, and verify 
the operation of your CudaCam Dome IP Camera following installation. 
Please contact our Technical Support team to schedule your complimentary 
telephone installation appointment.

Of course, this complimentary telephone installation appointment is not 
designed to replace the local support you may receive from your Barracuda 
Networks reseller. If you prefer, please do not hesitate to contact your 
Barracuda Networks reseller, whom we will be happy to coordinate with in 
order to provide additional deployment support.

Thank you again for choosing the CudaCam Dome IP Camera. We encourage 
you to contact your reseller or our Technical Support team that is available 
around the clock to assist with technical questions or concerns. We look 
forward to helping you with your current and future needs in the areas of 
security, networking, and data protection. 
 

Sincerely,

BJ Jenkins 
CEO

Summary of Contents for CudaCam

















Reviews: