Baroness TDA1200, Service Manual

Page: 46 / 89

Remove the bolt and spring washer from
the tine holder and then remove the spring
box.
Note:
It makes it easier to remove the right front
roller bracket.
1
2
3
kqszfp-006
Removal of front roller bracket_008
1 Spring box
2 Bolt and spring washer
3 Tine holder
Loosen the roller stopper and hold the front
roller bracket by hand.
1
3
2
kqszfp-007
Removal of front roller bracket_009
1 Roller stopper
2 Fastening plate
3 Front roller bracket
11.
12.
Remove the roller stopper and fastening
plate together while holding the front roller
bracket.
1
kqszfp-008
Removal of front roller bracket_010
1 Front roller bracket
Installation of front roller bracket
Caution
Refer to "Tightening torques" (Page 3-4) .
Note that the Baroness product warranty may
not apply to any defects caused by incorrect
or overtorque tightening, etc.
For installation, reverse the removing
procedure.
Inspection and repair of each section
Lower housing Assy
Lower housing Assy layout
1 1
g3cyaf-001
Lower housing Assy layout_001
1 Lower housing Assy
13.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-24
Inspection and repair of each section