Baroness SP160EB, Owner'S Operating Manual

Page: 65 / 83

Blade lever fulcrum
There is one point each on the left and right.
8bq62b-202
Greasing Points_009
Blade arm fulcrum
8bq62b-203
Greasing Points_010
Cultivator lever fulcrum
There is one point each on the left and right.
8bq62b-204
Greasing Points_011
Maintenance Work
Cleaning of Battery
Danger Danger
Do not clean the battery with a dry cloth.
Cleaning the battery with a dry cloth may
cause it to catch fire or explode due to static
electricity.
8.
9.
10.
Clean up the dirt and dust on the upper side
of battery with a cloth damped with water, or
wash off with water.
If there is corrosion or dirt on the terminals,
wash off with water or hot water and then
apply a thin coating of grease.
Cleaning of Cooling Fins
Important
Do not allow water to come into contact with
electrical components during cleaning.
It will cause malfunction of the machine.
Important
Unclean cooling fins will cause overheating or
malfunction to the servo driver or motor.
Important
Do not use fluid such as water and high-
pressure air to clean the cooling fins.
Also, do not use solid objects such as a
spatula or screwdriver.
Clean them with low-pressure air.
Otherwise, the fins may be damaged, possibly
resulting in reduced cooling performance.
If the cooling fins have been contaminated with
dust, be sure to clean them.
Especially after operating the machine in a
dusty environment, it is important to remove
dust as soon as possible.
Open the driver platform.
Carefully clean the cooling fins with low-
pressure compressed air.
1
2
3
xz92rr_001
Cleaning of Cooling Fins_001
1 Cooling fins
2 Driver platform
3 Rubber catch
1.
2.
1.
2.
Maintenance
SP160EB
Maintenance
Page 5-9
Maintenance Work