Baroness SP05A, Owner'S Operating Manual

Page: 61 / 76

Change of Small Blade
Note:
Depending on the specifications, this function
may not be available.
When wear of the small blade causes a
reduction in the amount of sand that is lifted
up, replace the small blade.
Loosen the bolts installing the small blade,
and then replace the small blade.
3
2
1
ez5gsw-001
Change of Small Blade_001
1 Blade
2 Small blade
3 Bolt
Adjust the small blade.
"Adjustment of Blade" (Page 4-16)
Tighten the bolts.
Change of The Cultivator Fitting
Note:
Depending on the specifications, this function
may not be available.
Caution
When removing the cultivator, be careful not
to pinch your hands.
When wear of the trapezoidal cultivator fitting
disables unhardening the sand, replace the
trapezoidal cultivator fitting.
Remove the bolts at the bottom of the
machine on the right side.
1.
2.
3.
1.
1 3
2
5qpzvh-001
Change of The Cultivator Fitting_001
1 Lever pipe
2 Trapezoidal cultivator fitting
3 Bolt
Remove the bolts at the bottom of the
machine on the left side.
1
2
5qpzvh-002
Change of The Cultivator Fitting_002
1 Cultivator
2 Bolt
Pull out the cultivator from the bottom of the
machine.
Remove the bolts, and then replace the
trapezoidal cultivator fittings.
1
2
5qpzvh-003
Change of The Cultivator Fitting_003
1 Bolt
2 Trapezoidal cultivator fitting
2.
3.
4.
Maintenance
SP05A
Maintenance
Page 5-9
Maintenance Work