Baroness LM56GC, Owner'S Operating Manual

Page: 50 / 88

1 Traveling/Working selector lever
A Reel ON
B Travel ON
C Travel OFF
Air Adjusting Plate
Caution
The air adjusting plate should be operated
while the engine rotation is stopped, and
adjusted to the position suitable for your work.
The air adjusting plate is attached on the reel
cover.
The dispersing angle of clippings can be
adjusted by changing the position of the air
adjusting plate.
Adjust according to the lawn conditions.
The air adjusting plate can be moved closer to
the reel cutter (cutting cylinder) when the lawn
condition is
“
dry
”
.
The air adjusting plate can be moved away
from the reel cutter (cutting cylinder) when the
lawn condition is "wet".
B
1
3
2
A
8h3xpo-001
Air Adjusting Plate_001
1 Air adjusting plate
2 Reel cutter (Cutting cylinder)
3 Reel cover
A Close
B Away
Engine Clutch Cover
The engine clutch cover is located on the left
side of the engine and covers the engine
clutch.
Open or close the engine clutch cover by
removing or installing the lock bolt.
1
2
A
B
paspfk-005
Engine Clutch Cover_001
1 Engine clutch cover
2 Lock bolt
A Loosen
B Tighten
Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
This lever should be operated while the main
clutch lever is set to the disengaged position,
and adjusted to the position suitable for your
work.
The groomer clutch lever is located on the
upper side of the right frame and has three
positions.
When the lever is set to the "Normal " position,
the groomer rotates in the same direction as
the reel cutter (cutting cylinder).
When the lever is set to the "Reverse "
position, the groomer rotates in the opposite
direction as the reel cutter (cutting cylinder).
When the lever is set to the "Stop" position, the
groomer will not rotate.
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-26
Operation Method