Baroness LM56GC, Owner'S Operating Manual

Page: 30 / 88

The appropriate engine oil level should be
between the upper and lower limit lines on
the gauge.
1
2
3
bgmiun-015
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
Screw the oil level gauge firmly.
Supply of Engine Oil
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
API Service Grade SE or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Screw the oil level gauge firmly.
Remove the oil level gauge.
Through the oil filling port, supply new
engine oil until the engine oil reaches a
level in the upper limit lines on the oil level
gauge.
Position the machine so that the engine will
be level, then check the engine oil level
without screwing the oil level gauge into the
oil filling port.
3.
4.
1.
2.
3.
Screw the oil level gauge firmly.
1
2
bgmiun-019
Supply of Engine Oil_001
1 Oil level gauge (Oil filling port)
2 Drain plug
Fuel
Inspection of Fuel Quantity
Level the machine and then remove the tank
cap to inspect fuel quantity from the fill port.
2
1
guc5f6-012
Inspection of Fuel Quantity_001
1 Tank cap
2 Fuel tank
4.
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-6
Inspections