Baroness LM551B, Owner'S Operating Manual

Page: 66 / 172

When the DPF auto regeneration inhibit switch
is pressed and set to "Auto regeneration inhibit
mode", the monitor displays Auto regeneration
inhibit icon.
25 C 55 %
0 RPM 80 %
1
% SOOT ENG RPM
FUEL LEVEL COOL TEMP
jvex95-004
DPF Auto Regeneration Inhibit Switch_002
1 Auto regeneration inhibit icon
DPF Parked Regeneration Switch
Danger Danger
Do not perform DPF regeneration in a location
where fires may occur since it will become
extremely hot around the exhaust outlet
during DPF regeneration.
Caution
Do not use the switch during back lapping.
Important
If parked regeneration is not required, it will
not start even if the switch is pressed.
The DPF parked regeneration switch is located
under the underseat cover.
The DPF parked regeneration switch is the
switch for actuating parked regeneration.
When the regeneration icon is blinking, press
the switch to start parked regeneration.
1
xlfvcz-012
DPF Parked Regeneration Switch_001
1 DPF parked regeneration switch
When parked regeneration starts,
Regeneration icon in the monitor display
changes from blinking to lighting.
1
65 C 55 %
2400 RPM 100 %
% SOOT ENG RPM
FUEL LEVEL COOL TEMP
xlfvcz-004
DPF Parked Regeneration Switch_002
1 Regeneration icon
Traveling Pedal
The traveling pedal is located in the right foot
area.
When forward depressed, the machine travels
forward. When backward depressed, the
machine travels backward.
1
1
A
B
yo3h9x-011
Traveling Pedal_001
1 Traveling pedal
A Forward
B Backward
LM551B
Handling Instructions
Page 4-36
Operation Method