Wipe off the spilt oil thoroughly.
2
1
kou8ls-012
Air Bleeding of Fuel System_001
1
Fuel filter
2
Air-bleed plug
Water Separator
Inspection of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
The water separator removes water from the
fuel.
Make sure that debris and water have not
accumulated in the cup.
With the float raised, water incorporation is
confirmed.
3
2
5
4
1
v1spa6-009
Inspection of Water Separator_001
1
Float
2
Cup
3
Water drain plug
4
Element
5
Air-bleeding bolt
5.
1.
Draining of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
Drain the water in accordance with the
Maintenance Schedule.
However, when the float is raised by water,
drain the water even before the schedule.
Follow the steps below to drain the water.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
Loosen the water drain plug and air-
bleeding bolt to drain the water into the
container.
3
2
5
4
1
v1spa6-009
Draining of Water Separator_001
1
Float
2
Cup
3
Water drain plug
4
Element
5
Air-bleeding bolt
Tighten the water drain plug and air-
bleeding bolt.
Bleed air from the fuel system.
1.
[1]
[2]
[3]
[4]
[5]
LM551B
Handling Instructions
Page 4-14
Daily Check List
Summary of Contents for LM551B
