Baroness LM551, Service Manual, Page: 23 / 213

General Precautions
Bearing
The bearing is a precision machine part.
Handle the bearing in an appropriate work
environment so that dust does not enter the
interior, and be extremely careful not to subject
the bearing to strong impact.
To install the bearing correctly, use a bearing
driver.
Caution
Be careful not to hit your hand with a hammer
etc.
When pressing the bearing into the shaft,
apply pressure evenly around the inner ring
of the bearing using the bearing driver.
3
2
1
gr5d95-001
Bearing_001
1 Shaft
2 Bearing
3 Bearing driver
When pressing the bearing into the housing,
apply pressure evenly around the outer ring
of the bearing using the bearing driver.
3
2
1
gr5d95-002
Bearing_002
1.
2.
1 Housing
2 Bearing
3 Bearing driver
When pressing the bearing into the shaft and
housing evenly, apply pressure evenly with
the bearing driver in contact with the inner
ring and outer ring of the bearing.
4
3
2
1
gr5d95-003
Bearing_003
1 Shaft
2 Housing
3 Bearing
4 Bearing driver
3.
Maintenance Standards and Maintenance
LM551
Maintenance Standards and Maintenance
Page 3-9
General Precautions