Baroness LM551, Service Manual, Page: 189 / 213

Arm
Replacement of Bushing
If the bushing becomes damaged due to
wear, insufficient lubrication, or due to water
penetration, the bushing may develop
looseness and the arm will not move
smoothly.
If the arm does not move smoothly, inspect
the bushing, and if necessary, replace the
bushing.
The shape of the arm may differ depending
on the type of mower unit it is mounted on, or
the installation position.
1
xpxxkw-001
Replacement of Bushing_001
1 Arm
Prepare a bearing puller.
1
xpxxkw-006
Replacement of Bushing_002
1 Bearing puller
1.
Secure the arm on a vise table.
Note:
Protect the arm with waste cloth to prevent
it becoming damaged.
1
2
3
xpxxkw-002
Replacement of Bushing_003
1 Arm
2 Vice table
3 Waste cloth
Install the bearing puller on the bushing.
2
1
xpxxkw-003
Replacement of Bushing_004
1 Bearing puller
2 Bushing
2.
3.
Main Vehicle
LM551
Main Vehicle
Page 6-45
Inspection and Repair of Each Section