Baroness LM551, Service Manual, Page: 154 / 213

1 Kingpin stopper
2 Nut
3 Stopper bolt
A 1.0 mm (0.039 in)
Use the same procedure to adjust the
steering angle when the steering wheel is
turned to the left.
Follow the steps below to adjust the pivot
right side swing angle.
Loosen the nut of the stopper bolt.
Adjust the length of the stopper bolt to
43.0 mm (1.70 in).
Tighten the nut.
1
2
A
3
clnf5j-003
Adjustment of Pivot Stopper_003
1 Pivot
2 Stopper bolt
3 Nut
A 43.0 mm (1.70 in)
Use the same procedure to adjust the left
side swing angle.
2.
3.
[1]
[2]
[3]
4.
Adjustment of Control Arm
The control arm can be adjusted up or down
and forward or backward.
Adjust the position to fit the operator.
Loosen the nut.
Slide the control arm up or down and forward
or backward to the appropriate position.
Tighten the nut.
1
2
2
1
3
4
5
qpisjz-001
Adjustment of Control Arm_001
1 Control arm
2 Nut
3 Spring washer
4 Washer
5 Bolt
1.
2.
3.
LM551
Main Vehicle
Page 6-10
Adjustment