Baroness LM551, Service Manual, Page: 133 / 213

1 1
2
3
4
5
com
6
7
10
9
11
12
14
13
15
16
8
bsdzeb-002
Inspection of Terminal Relay_002
Inspection of Relay (G6B-2114P-US)
The relay can be determined to be good or
faulty by measuring its coil resistance and
continuity.
Remove relay (G6B-2114P-US) from the
terminal relay.
Use a circuit tester to check the resistance
value between relay terminals 1 and 8.
Note:
Coil resistance 480 Ω
1
8
3
6
4 5
38jyg3-001
Inspection of Relay (G6B-2114P-US)_001
Check that the continuity of the relay
terminals are in the following condition.
Terminals 5-6: continuity
Terminals 3-4: no continuity
1
8
3 6 4 5
38jyg3-002
Inspection of Relay (G6B-2114P-US)_002
1.
2.
3.
･
･
Important
This relay has a specific polarity.
When connecting the battery, always connect
positive (+) to terminal 8.
Check that the continuity is in the following
condition when applying battery voltage
between relay terminals 1 and 8.
Terminals 5-6: no continuity
Terminals 3-4: continuity
18
3 6 4 5
38jyg3-003
Inspection of Relay (G6B-2114P-US)_003
Solenoid Valve
Reel Rotation Solenoid Valve
The reel rotation solenoid valve is located
under the right side of the seat, and there are
four solenoids mounted to control the rotation
of the reel.
1
4
2
3
ut3b2h-001
Reel Rotation Solenoid Valve_001
1 Front mower rotation solenoid
2 Rear mower rotation solenoid
3 Front mower reverse rotation solenoid
4 Rear mower reverse rotation solenoid
Note:
All four coils used for the reel cutter rotation
solenoid valve are the same.
4.
･
･
Electrical System
LM551
Electrical System
Page 5-47
About The Electrical Components