Baroness LM551, Owner'S Operating Manual, Page: 56 / 102

Traveling Pedal
The traveling pedal is located in the right foot
area.
When forward depressed, the machine travels
forward. When backward depressed, the
machine travels backward.
1
1
A
B
yo3h9x-011
Traveling Pedal_001
1 Traveling pedal
A Forward
B Backward
The height and angle of the traveling pedal can
be adjusted to fit the operator.
Forward:
The height and angle can be adjusted by
changing the installation position of the bolt
and spring washer.
Backward:
The height can be adjusted by changing the
installation position of the bolt and spring
washer.
1
4
3
4
3
2
yo3h9x-012
Traveling Pedal_002
1 Traveling pedal (forward)
2 Traveling pedal (backward)
3 Bolt
4 Spring washer
Pedal Stopper
The pedal stopper is located in the right foot
area.
This lever changes the amount that the forward
pedal can be depressed.
1
A
A
B
B
1
2
unp7tf-003
Pedal Stopper_001
1 Pedal stopper
2 Operating speed lock lever
A ON
B OFF
Use the pedal stopper during operation.
You can adjust the amount that the forward
pedal can be depressed.
Loosen the bolt to adjust to 12 km/h or less.
LM551
Handling Instructions
Page 4-32
Operation of Each Section