Baroness LM551, Owner'S Operating Manual, Page: 35 / 102

Water Separator
Inspection of Water Separator
Important
Water-contaminated fuel may impair engine
startability, decrease output or damage engine
parts.
The water separator removes water from the
fuel.
Make sure that debris and water have not
accumulated in the cup.
With the float raised, water contamination is
confirmed.
When the float reaches the drain level,
drain the water.
2
4
3
1
v1spa6-008
Inspection of Water Separator_001
1 Water Separator
2 Float
3 Cup
4 Drain level
Draining of Water Separator
Important
Water-contaminated fuel may impair engine
startability, decrease output or damage engine
parts.
Drain the water after at least the number of
hours in the Maintenance Schedule and
whenever the float is raised by water.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
Close the fuel cock of the water separator.
1.
1.
2.
3.
1
2
A
B
v1spa6-005
Draining of Water Separator_001
1 Fuel cock
2 Air-bleeding plug
A ON (open)
B OFF (close)
Remove the ring nut, and then remove the
cup.
3 2
1
v1spa6-006
Draining of Water Separator_002
1 Ring nut
2 Cup
3 Element
Drain the water from the cup.
Important
During installation, prevent contamination with
dirt or dust.
If the fuel is contaminated with dirt, dust, etc.,
the fuel injection pump and injection nozzle
will become worn.
Correctly install all parts in their original
positions.
Fill up the fuel tank with fuel.
Open the fuel cock of the water separator.
4.
5.
6.
7.
8.
Handling Instructions
LM551
Handling Instructions
Page 4-11
Inspection Before Use