Baroness LM331, Service Manual, Page: 23 / 165

Greasing Points
Grease nipples are installed in the following
locations.
Add grease every 50 hours of operation.
However, for locations where a time is
specified, add grease according to that
schedule.
9
1
1
1
8 2
3,4,6,7
5
10
11
12
12
8bq62b-346
Greasing Points_001
Location
No. of
greasing
points
1 Lift arm fulcrum 5
2 Mower arm fulcrum 1
3 Brake pedal shaft fulcrum 1
4 Brake lever shaft 1
5 Rear wheel housing 1
6 Tension lever 1
7 Neutral cam lever 1
8 Traveling pedal shaft fulcrum 1
9 Traveling pedal relay lever 1
10 Front wheel brake lever 2
11 Mower lift cam lever 1
12 Mower coupling 2
Lift arm fulcrum
Mower unit #1
There is one greasing point on the lift arm
fulcrum connected to the mower unit.
8bq62b-269
Greasing Points_002
Mower units #2 and #3
There are two greasing points on the lift
arm fulcrum connected to each mower
unit.
8bq62b-270
Greasing Points_003
Mower arm fulcrum
Mower unit #1
There is one greasing point on the mower
arm fulcrum.
8bq62b-271
Greasing Points_004
1.
2.
Maintenance standards and maintenance
LM331
Maintenance standards and maintenance
Page 3-11
Greasing