Baroness LM331, Owner'S Operating Manual, Page: 60 / 103

Bolts and Nuts
Inspection of Bolts and Nuts
Important
A number of bolts are used in each part of this
machine.
Be sure to re-tighten the bolts and nuts,
because they may be loosened at the earlier
stage of the use.
Check the bolts and nuts for looseness and
coming off.
Check the bolts and nuts for cracks and
damages.
Check the bolts and nuts for rust.
Check around the bolts and nuts for traces
of rust fluid.
Check for unequal bolt length.
Check the bolts and nuts for stripped
threads and abrasion.
Inspection of Wheel Mounting Bolt
Important
Tighten the wheel mounting bolts on the
specified torque by using a torque wrench.
Check the wheel mounting bolts and wheel
nuts for looseness and coming off.
Check the wheel mounting bolts and wheel
nuts for cracks and damages.
Check the wheel mounting bolts and wheel
nuts for rust.
Check around the wheel mounting bolts
and wheel nuts for traces of rust fluid.
Check the wheel mounting bolts for
unequal bolt length.
Check the wheel mounting bolts and wheel
nuts for stripped threads and abrasion.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Grass Catcher
Inspection of Grass Catcher
The grass catcher may no longer correctly
collect grass clippings due to its wear,
damage, deformation, etc., caused by
frequent use.
Make sure that there is no wear or
deterioration of the grass catcher.
Make sure that there is no damage to the
grass catcher.
Make sure that there is no interference to
moving parts due to deformation of the
grass catcher.
Adjustment before Work
Adjustment of Steering Wheel
Warning
Do not make adjustments while traveling since
doing so is dangerous.
Caution
Be sure the steering wheel position is securely
locked.
It may result in an unexpected accident if it
becomes loose while traveling.
The steering wheel can be adjusted up or
down.
Adjust the position to fit the operator.
Shift the tilt lever to the "FREE" position, move
the steering wheel to the position that suits the
work requirements, and then shift the tilt lever
to the "LOCK" position to secure the steering
wheel in place.
The tilt lever is located at the left in front of the
driver
’
s seat.
A
2
1
B
75uxaw-012
Adjustment of Steering Wheel_001
1.
2.
3.
LM331
Handling Instructions
Page 5-16
Adjustment before Work