Baroness LM3210A, Owner'S Operating Manual, Page: 95 / 167

Water Separator
Inspection of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
The water separator removes water from the
fuel.
Make sure that debris and water have not
accumulated in the cup.
With the float raised, water incorporation is
confirmed.
5
1
3
2
4
v1spa6-001
Inspection of Water Separator_001
1 Float
2 Cup
3 Water drain plug
4 Element
5 Air-bleeding bolt
Draining of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
Drain the water in accordance with the
Maintenance Schedule.
However, when the float is raised by water,
drain the water even before the schedule.
Follow the steps below to drain the water.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
1.
1.
[1]
[2]
Loosen the water drain plug and air-
bleeding bolt to drain the water into the
container.
5
1
3
2
4
v1spa6-001
Draining of Water Separator_001
1 Float
2 Cup
3 Water drain plug
4 Element
5 Air-bleeding bolt
Tighten the water drain plug and air-
bleeding bolt.
Bleed air from the fuel system.
Cleaning of Water Separator
Important
If water contaminates the fuel, the supply
pump and injector will seize due to heat.
Clean the water separator in accordance with
the Maintenance Schedule.
However, when debris has accumulated in the
cup, clean it even before the schedule.
Follow the steps below to clean the water
separator.
Stop the engine, and then turn the key
switch to the "OFF" position.
Place a container under the water
separator.
[3]
[4]
[5]
1.
[1]
[2]
Handling Instructions
LM3210A
Handling Instructions
Page 5-15
Inspection and Cleaning