Baroness LM3210A, Owner'S Operating Manual, Page: 46 / 167

Warning Mechanisms
Warning Buzzer
Important
When the buzzer (intermittent tone) sounds,
be sure to stop operation since the engine is
overheated.
Do not stop the engine without idling. Allow
the engine to cool down, first. Keep the engine
idling for about 5 minutes before stopping.
Remove dust that is jamming in the radiator,
air cleaner, and etc.
This machine features warning mechanisms for
overheating, the hydraulic oil and the engine.
Overheat Warning Buzzer
If the engine water temperature exceeds 110
°C (230 °F), a buzzer will sound. (intermittent
tone)
When the buzzer sounds, stop the engine
immediately, and then inspect the machine
and perform any necessary maintenance.
Hydraulic Oil Level Warning Buzzer
If the oil level in the hydraulic tank declines
from the specified level by approximately 2.0
dm
3
(2.0 L), a buzzer will sound. (continuous
tone)
When the buzzer sounds, stop the engine
immediately, and then inspect the machine
and perform any necessary maintenance.
1.
2.
Engine Warning Lamp
Important
Make repairs immediately if the fault codes of
PCD (Particulate Control Diagnostic) and
NCD (NOx Control Diagnostic) appear.
Engine warning lamp (LED) lights up or blinks
when a failure occurs on the function of engine.
Check the fault code (DTC) in the monitor
display.
1
vdod12-001
Engine Warning Lamp_001
1 Engine warning lamp
The lighting patterns of engine warning lamp
are as follows.
Note :
PCD means fault codes relevant to Particulate
Control Diagnostic.
NCD means fault codes relevant to NOx
Control Diagnostic.
Engine warning lamp lights up when only
DTC other than PCD/NCD come up.
1 2 A
vdod12-002
Engine Warning Lamp_002
1 Fault detected
2 Recovery
A Lighting
1.
LM3210A
Description of Functions
Page 4-10
Warning Mechanisms