Baroness LM3210A, Owner'S Operating Manual, Page: 45 / 167

Brake Pedal
The brake pedal is located in the left foot area.
To stop the machine, depress the brake pedal
when needed.
1
2
ukjawr-008
Brake Pedal_001
1 Brake pedal
2 Parking brake lever
Parking Brake Lever
Caution
Never park the machine on a slope.
Important
Be sure to release the parking brake before
driving.
Otherwise, it could cause the brakes and
hydraulic equipments to malfunction.
The parking brake lever is located to the left of
the front cover.
When parking, depress the brake pedal, and
then pull the parking brake lever completely.
To release the parking brake, depress the brake
pedals.
1
2
ukjawr-008
Parking Brake Lever_001
1 Brake pedals
2 Parking brake lever
Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following four conditions.
An operator is sitting on the seat.
The parking brake is applied.
The reel rotation switch is set to the "OFF"
position.
The traveling pedal is set to the neutral
position.
Important
When you restart the engine after the safety
device stops the engine, be sure to return the
ignition key to the "OFF" position first, and
then restart it.
Otherwise the engine does not start.
In the event the operator leaves the seat with
the parking brake applied and the engine
running, the safety device will be activated
and will stop the engine under any of the
following conditions:
The traveling pedal is not set to the neutral
position. (The operator has depressed the
traveling pedal.)
The reel rotation switch is set to the
"Rotate" position.
However, when the reel reverse switch is
set to the "ON" position (reverse rotation),
the engine does not stop.
1.
･
･
･
･
2.
･
･
Description of Functions
LM3210A
Description of Functions
Page 4-9
Brake Pedal