Baroness LM3210A, Owner'S Operating Manual, Page: 124 / 167

Replacement of Tires
Replacement of Front Tires
Removing front tires
Follow the steps below to remove the front
tires:
Loosen the bolts.
1
2
jnpvbf-001
Replacement of Front Tires_001
1 Front tire
2 Bolt
Securely place the jack beneath the jack-
up point of the front left/right frame area,
and then raise it until the tire lifts off the
ground.
"Jack-Up Points" (Page 6-2)
Remove the bolts.
Remove the tire from the wheel mounting
seat.
Installing front tires
Important
Tighten the bolts in the tightening order
(crosswise).
Important
Tighten the wheel mounting bolts on the
specified torque by using a torque wrench.
For installing the front tires, reverse the
removing procedure.
1.
[1]
[2]
[3]
[4]
2.
Replacement of Rear Tire
Removing rear tires
Follow the steps below to remove the rear
tire.
Loosen the bolts.
1
2
jnpvbf-001
Replacement of Rear Tire_001
1 Rear tire
2 Bolt
Securely place the jack beneath the jack-
up point below the rear wheel motor, and
then raise it until the tire lifts off the
ground.
"Jack-Up Points" (Page 6-2)
Remove the bolts.
Remove the tire from the wheel mounting
base.
Installing rear tires
Important
Tighten the bolts in the tightening order
(diagonally).
Important
Tighten the wheel mounting bolts on the
specified torque by using a torque wrench.
For installing the rear tire, reverse the
removing procedure.
1.
[1]
[2]
[3]
[4]
2.
LM3210A
Maintenance
Page 6-24
Adjustment and Replacement