Baroness LM3210A, Owner'S Operating Manual, Page: 116 / 167

Adjustment of Cutting Height
Roller (Roller Type)
Adjust the cutting height to fit your cutting
work.
You can adjust the front roller in four stages.
A
B C D
9pu8ye-008
Roller (Roller Type)_001
A 10 - 20 mm (0.39 - 0.79 in)
B 20 - 30 mm (0.79 - 1.81 in)
C 28 - 40 mm (1.10 - 1.57 in)
D 38 - 60 mm (1.50 - 2.36 in)
Attach the front roller in a position within the
range of cutting height that suits your work
requirements.
To increase cutting height:
Loosen cutting height adjustment nut A,
tighten cutting height adjustment nut B,
then lower the rear roller.
Use the cutting height gauge to
determine the position, then tighten
cutting height adjustment nut A securely.
To decrease cutting height:
Loosen cutting height adjustment nut B,
tighten cutting height adjustment nut A,
then raise the rear roller.
1.
[1]
[2]
2.
[1]
Use the cutting height gauge to
determine the position, then tighten
cutting height adjustment nut B securely.
2
3
4
A
7
5
1
6
9pu8ye-004
Roller (Roller Type)_002
1 Reel cutter (cutting cylinder)
2 Front roller
3 Cutting height gauge
4 Bed knife (Bottom blade)
5 Cutting height adjustment nut A
6 Cutting height adjustment nut B
7 Rear roller
A Cutting height
Front Wheel Type
Adjust the cutting height to fit your cutting
work.
You can adjust the wheel to one of four levels.
A
B C D
ut7d6z-008
Front Wheel Type_001
A 17 - 32 mm (0.67 - 1.26 in)
B 23 - 37 mm (0.91 - 1.46 in)
C 29 - 43 mm (1.14 - 1.69 in)
D 35 - 68 mm (1.38 - 2.68 in)
[2]
LM3210A
Maintenance
Page 6-16
Adjustment and Replacement