Baroness LM3210A, Owner'S Operating Manual, Page: 114 / 167

Steering cylinder spherical bearing
There are two points.
ysd2y4-023
Type_R_005
Operations Before Maintenance
Swiveling Mower Units #2 and #3
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Be careful not to inhale exhaust gas while
swiveling the mower units.
Maintenance can be performed more easily
with mower units #2 and #3 swiveled.
Lower the mower units, and then stop the
engine.
Remove the clip pin, and then remove the
grip pin.
2
1
sibu71-001
Swiveling Mower Units #2 and #3_001
1 Clip pin
2 Grip pin
2.
1.
2.
Swivel the mower unit toward the outside of
the machine.
sibu71-002
Swiveling Mower Units #2 and #3_002
Fully insert the grip pin into the locking hole
for maintenance, and then install the clip pin
in the grip pin.
2
1
sibu71-003
Swiveling Mower Units #2 and #3_003
1 Grip pin
2 Clip pin
Start the engine, and then raise the mower
units.
sibu71-005
Swiveling Mower Units #2 and #3_004
After the maintenance is completed, reverse
the procedure to return the machine to its
original condition.
3.
4.
5.
6.
LM3210A
Maintenance
Page 6-14
Operations Before Maintenance