Baroness LM315GC, Service Manual

Page: 140 / 199

Installation of Grass Catcher Roller Assy
Caution
The reel cutter (cutting cylinder), bed knife
(bottom blade), and groomer blades are all
edged tools.
Handle them carefully, since they could cut
your hands and feet.
For installation, reverse the removing
procedure.
Note:
Follow the steps below to install the mower
mounting bracket.
Install the mower mounting bracket with
the larger notch of the ball joint holder
facing downward.
2
1
3
sdkxrf-001
Installation of Grass Catcher Roller Assy_001
1 Mower mounting bracket
2 Ball joint holder
3 Grass catcher roller Assy
Follow the same steps to install the
mower mounting bracket on the opposite
side as well.
[1]
[2]
CR Brush Driver
Removal of CR Brush Driver Assy
Caution
The reel cutter (cutting cylinder), bed knife
(bottom blade), and groomer blades are all
edged tools.
Handle them carefully, since they could cut
your hands and feet.
Remove the mower unit and turn it upside
down. (See " "Removal of Mower Unit"
(Page 7-8) ".)
Remove the bracket mounting bolt,
spring washer, and washer A.
Remove washer B, spring washer, and
nut fixing the rear roller.
Pull out the rear roller bracket in the
direction of the arrow.
spc9h1-001
1,2,3
5,6,7
8
4
Removal of CR Brush Driver Assy_001
1 Bracket mounting bolt
2 Spring washer
3 Washer A
4 Rear roller bracket
5 Washer B
6 Spring washer
7 Nut
8 Rear roller
1.
2.
[1]
[2]
[3]
LM315GC
Operating Machine and Mower Units
Page 7-22 Removal and installation of each section