Baroness LM315GC, Owner'S Operating Manual, Page: 46 / 86

Make sure that the traveling pedal is in
neutral position.
Shift the throttle lever halfway from the
turtle icon (low speed) to the rabbit icon
(high speed) position.
Pull the choke knob.
Pull the knob half way for restarting, as
necessary.
1
v2e27i-019
Procedure to Start Engine_004
1 Choke lever
Switch the ignition key to the "START"
position.
1
A
B
C
v2e27i-020
Procedure to Start Engine_005
1 Ignition key
A OFF
B ON
C START
Caution
Quickly returning the ignition key from the
"START" position to the "ON" position may
result in damage to the machine.
When the starter starts rotating and the
engine starts, return the ignition key to the
"ON" position slowly.
5.
6.
7.
8.
9.
Check that the engine has started, and then
return the choke knob to its original
position.
Shift the throttle lever to the turtle icon (low
speed), and then warm up the engine for
1-2 minutes.
Gradually move the throttle lever to the
rabbit icon (high speed).
Procedure to Stop Engine
Set the traveling pedal to the neutral
position.
Apply the parking brake.
Set the reel rotation switch to the "TRAVEL"
(reel stop) position.
Shift the throttle lever to the turtle icon (low
speed), and then warm up the engine for
1-2 minutes.
Switch the ignition key to the "OFF"
position.
Make sure that the engine has stopped.
Remove the ignition key.
Leave the driver's seat.
Close the fuel cock.
The fuel cock is located beneath the fuel
tank.
10.
11.
12.
1.
2.
3.
4.
5.
6.
7.
8.
9.
LM315GC
Handling Instructions
Page 4-22
Procedure to Start / Stop Engine